Description
CED IR1200 Wall Mounted Infra Red Heater 1200W (2 Bar)
Choice of operating as 600 watt (1 bar)or 1200W (2 bar) selected by operating pull switch. The pull cord also switches the heater off.
Mechanical flag indication of how many bars selected.
This heater must be mounted on wall. The bracket is adjustable for direction. The heater must be mounted a minimum of 1.8 metres from the floor.
If fitted in a bathroom the heater must be at least 600mm from the edge of bath or top of handbasin. All electrical equipment located in a bathroom must be protected by a 30mA RCD or RCBO device for safety.
600mm long pull cord. 1.3m long cable, fitted with 13A plug which can be removed if not required.
Dimensions: 540mm wide x 130mm high x 135mm deep (fully tilted).Suitable for indoor use only. IP24.
Approved to BS EN60335-2. CE Marked.
Harry –
I am regular reader, how are you everybody?
This piece of writing posted at this web site is genuinely nice.
my web-site :: Lester
Hollie –
Hello There. I found your blog the use of msn. This is an extremely
neatly written article. I’ll be sure to bookmark it and return to read extra of your useful info.
Thanks for the post. I will definitely comeback.
Feel free to surf to my webpage … Kauf von cabergoline in der Schweiz