Description
Envirovent ECODMEVT Continuously Running Decentralised Extractor Fan dMEV – Timer Model
This model is designed to run continuously at a low level. It also incorporates a run-on timer which operates in connection with the room light switch. When the light is switched on the fan starts, when the light is switched off the fan continues to run for the pre-set period. Permanent live, switched live and neutral wires (3 cores + earth) are required at the fan position in order to function correctly.
- Constant volume, continuously running extract ventilation with up to 5 adjustable trickle speed settings
- Mains 230/240V AC 50HZ
- Extraction rate 21 litres per second, 75 cubic metres per hour
- Power consumption: 16 watts
- Incredibly quiet running below 20 dB(A)
- 4 interchangeable coloured front panel trims
- Complies with Building Regulations, Part F, for System 3 – Continuous Mechanical Extract
- SAP Appendix Q eligible achieving a low Specific Fan Power of 0.28 W/l/s
- Fitted with low watt DC motors for minimum energy consumption down to 1.5 Watts
- Continuous volume extract level adjustable at installation from 4 litres per second to 15 litres per second
- Timer over-run adjustable 1 – 30 minutes
- Can be mounted on wall or ceiling
- IPX4 rated
- CE approved
Dimensions: 158mm wide x 158mm tall x 48mm deep (beyond installed surface). 99mm diameter spigot, extends for 80mm. For connection to 100mm / 4 inch ducting
bocek ilaclama –
Nice bro thank you.
Georgianna –
Excellent post. I used to be checking constantly this blog and I
am impressed! Extremely useful information specially
the final phase 🙂 I care for such info much.
I used to be seeking this certain information for a very long time.
Thank you and best of luck.
my blog post; Zack