Primeline Santon 94020020 PWHWASH Over-Sink Handwash Unit 3kW

£45.24 Ex VAT

Out of stock

Description

Primeline Santon PWHWASH Over-Sink Handwash Unit 3kW

Compact instantaneous hand wash unit, rated at 3.kW.

These products incorporate extra safety devices to provide additional user protection.

FEATURES

  • Single-turn rotary control dial
  • ‘Power on’ indicator
  • Durable 200mm stainless steel swivel spout
  • Consistent, splash free spray pattern
  • Flow stabilised for constant outlet temperature
  • Two levels of temperature protection
  • Excessive pressure protection
  • 15mm female ‘Push Fit’ connection to water supply.

TECHNICAL SPECIFICATION

Rating : 3.1kW @ 240V.

Controls : Single-turn rotary control dial for on/off, temperature and flow setting.

Outer Casing : White moulded High Impact Polystyrene plastic cover.

Heat Unit : Copper-sheathed rod type element.

Water Container : Copper

Safety : Self re-setting thermal cut-out set at 52°C for over heat protection. Non self re-setting second stage cut-out set at 92°C. Pressure relief device in the base of the container to prevent high-pressure build-up. Temperature stabiliser maintains consistent outlet temperature under variable water pressure conditions.

Ingress protection : IPX4.

Approvals : BEAB and KIWA approved. Manufactured in a BS EN ISO 9001:2000 registered factory. Guarantee 2 year product guarantee with on-site service support from date of purchase.

INSTALLATION

Fixing:
Base assembly is secured to wall by two fixing screws, followed by electrical and plumbing connections. The spout and front cover are then attached. Two screws secure the front cover.

Plumbing:
15mm female push fit at the base of the unit for bottom or rear (concealed) entry. Incoming feed pressure should be between 0.1Mpa (1 bar-14.5psi) and 0.7Mpa (7 bar-100psi).

Electrical:
Special requirements of the BS7671 (IEE Wiring Regulations) should be observed when installed in bathrooms. Units must be permanently connected to the electrical supply through a double-pole linked isolating switch. Power can be supplied from a ring final circuit via a fused spur with a double pole linked isolating switch with a 13A minimum breaking capacity. Cable: 1.5-2.5mm2. Cable entry from rear or bottom of unit. All electrical work must comply with the latest BS7671 (IEE Wiring Regulations).

This product is manufactured by Santon but badged with Primeline own brand

Reviews

There are no reviews yet.

Be the first to review “Primeline Santon 94020020 PWHWASH Over-Sink Handwash Unit 3kW”